Monitoring · Maintenance · Inventory
Run Every Site.
Visit Fewer.
One system for the whole operation — monitor and control in real time, turn alerts into work orders, schedule maintenance, and track the parts to do the job. Cut site visits and replace six-figure SCADA projects — with a platform that deploys in minutes, then helps your team get the work done.
One system for the whole operation. Zero guesswork.
The Rulo Difference
Rulo is at the center of your operations — the intersection of simplicity, security and cost.
Named after Franz Reuleaux, the 19th-century German engineer who advanced the study of machines, a Reuleaux triangle is a shape formed by the intersection curves when circles are drawn from the vertices of an equilateral triangle.
Simplicity
Detailed reports when you want them and easy-to-read dashboards when you're on the go. Simple installation and a user-friendly mobile interface gives new meaning to "out of sight, out of mind."
Security
Protect your assets with banking-grade security. Rulo adheres to NIST standards for secure communication by utilizing TLS 1.2 and 256-bit encryption.
Cost
Rulo is the lowest cost solution to install and operate. When equipment fails to produce at max capacity, it costs you time and money — Rulo notifies you when activity falls below user-defined thresholds.
Built for Your Industry
Purpose-built solutions to monitor, control, and automate operations across the industries that need reliability most.
Oil & Gas
Monitor tank levels, gas meters, VFD pumps, gas lift, and plunger lift across every site. Catch issues before they cost you production.
Wastewater
Keep lift stations and pumps running. Real-time status, predictive alerts, overflow prevention — all from your desk.
Water Management
Track RO systems, DI tanks, and specific resistance down to 18 MΩ·cm. Continuous purity assurance for cosmetics and vaccine manufacturing.
Hospital Water Systems
Monitor chlorine generators, analyzers, and dosing systems. Automated compliance documentation for every shift.
Rental Asset Tracking
Know when your compressors, generators, and skids are running, idle, or out of fuel. Stop losing revenue to untracked equipment.
Industrial Operations
Connect paint lines, manufacturing processes, and production equipment. Track throughput, catch quality deviations, keep lines running.
What Your Team Gets
How It Works
Three steps from disconnected equipment to a closed loop — all without switching tools.
Connect
Wire EdgeTrak into the sensors, PLCs, and meters you already have. Then set parameters, thresholds, and alerts remotely — no programming, no SD cards.
Detect
Levels, pressures, and fault codes stream in continuously. Alarms pinpoint which asset, how bad, and whether it's a setpoint change or a truck.
Resolve
Adjust setpoints and push automation rules from your desk. When a truck is genuinely needed: work order, parts, right tech, one trip.
Every step happens remotely. Add new alerts, reconfigure thresholds, update automation rules — anytime, from anywhere, without a site visit.
Platform Capabilities
Everything from the sensor to the closed work order — equipment monitoring and control on one side, the maintenance and inventory your team runs on atop the same data.
Live Streaming Data
Telemetry streams in from every site continuously, so dashboards show current conditions rather than the last time someone checked. Alerts carry escalation chains and are edge-processed, so you're notified even when connectivity drops.
Remote Control
Change setpoints, toggle outputs, start and stop equipment — all remotely. Respond to conditions in real time without dispatching a truck.
Automation Rules
Define if-then logic that acts for you. Automated responses to threshold events, scheduled operations, and compliance reports that generate themselves.
Universal Connectivity
Modbus RTU/TCP, analog 4-20mA, digital I/O, CAN J1939 — connects to the sensors, meters, and PLCs you already have installed. Plug in and go.
Work Orders
Turn an alert into an assigned job without retyping it. Route work to the right tech with asset history attached, capture readings and photos in the field, and close out with a timestamped record.
Preventive Maintenance
Schedule PMs by calendar date or actual runtime hours. Rulo already knows the run hours, so maintenance triggers off real usage instead of guesses — see what's due and what's overdue.
Parts & Inventory
Track parts across warehouses with reorder thresholds, low-stock alerts, and transfers. Check what's on hand before you dispatch, and tie every part consumed back to the job that used it.
Suppliers & Receiving
Manage suppliers, receive parts against incoming transfers, and keep a full movement history. Forecast reorders from measured consumption instead of reacting to an empty shelf.
Remote Configuration
Set up parameters, thresholds, alerts, and logic from anywhere. Update configurations anytime as operations change — no site visit, no reprogramming.
Reports & Compliance
Scheduled or on-demand. Compliance-ready. PDF, CSV, or live dashboard — the format your regulators need, generated automatically every shift.
OTA Updates
Device software managed via secure over-the-air updates. No PLC programming, no SD cards, no site visits. Every device stays current automatically.
Bank-Grade Security
Device authentication, 256-bit encrypted transport, TLS 1.2, certificate management, and secure VPN tunnels to every device — built in from day one.
From Alert to Closed Work Order.
A CMMS doesn't know your pump is failing. A SCADA can't dispatch a tech. Rulo does both, because the work orders, maintenance schedules, and parts all run on the same data your equipment is already sending.
Work Orders
An alert becomes an assigned job in one step — no retyping, no phone tag. The tech gets the asset, the history, and the parts list before they leave. Every close-out is timestamped and searchable.
Maintenance
Rulo already counts the run hours, so preventive maintenance triggers on actual usage instead of a calendar guess. Track what's due, what's overdue, and what each asset costs you to keep running.
Parts & Inventory
Parts, warehouses, suppliers, and transfers in one place. Reorder thresholds and low-stock alerts mean you find out before the shelf is empty — not when the tech is already on site.
Inventory & Parts — stock levels, reorder thresholds, and transfers across every warehouse.
The hardware underneath
EdgeTrak IIoT Controllers make it possible.
Field-hardened controllers wired into the equipment you already own — no rip-and-replace, no custom engineering. LTE or Ethernet, IP65 outdoor or DIN rail, 20 to 500 parameters per device.
Compare the EdgeTrak familyReal-World Results
A producer deployed EdgeTrak 4S to automate data acquisition across their fleet of wells and tank sites, replacing manual 'pencil and paper' reporting. Real-time alerts for tank levels and pressure changes allow the team to intervene only when necessary, preventing production downtime and ensuring industrial-grade reliability in extreme weather conditions.
A municipal utility deployed EdgeTrak 4S for 24/7 remote visibility into their lift station and backup generator. Instant SMS alerts for power surges and high-water levels now reach the town's small team wherever they are — and when a fault does need a truck, the alert becomes a work order with the asset history and the right parts already attached, so the one trip they make is the only one.
A water quality management company deployed Rulo to provide 24/7 remote visibility into high-purity water systems across multiple client sites. By automating data logging for parameters like resistivity and resin bed status, the system replaced manual checks with real-time anomaly detection and compliance-ready PDF reporting, ensuring critical water quality standards are met without unplanned downtime.
A hospital system manages chlorine dosing across multiple facilities, with compliance documentation generated automatically for every shift. Dosing pumps run on runtime-based preventive maintenance rather than a fixed calendar, and because spare parts are tracked against each asset, the team knows a replacement is on the shelf before the PM comes due.
Rulo vs. SCADA + a Separate CMMS
The usual stack is a SCADA for the equipment, a CMMS for the work, and a spreadsheet to reconcile them. Rulo is one system.
Ready to Run Every Site?
Schedule a demo tailored to your industry. We'll walk the whole loop on your own assets — detect, identify, and resolve, through to the closed work order.
*Rulo customers have achieved these results. Individual results may vary based on deployment scale and platform utilization.